Nanjing Juge Environmental Technology Co., Ltd.
Add to Cart
Digital Integrated Low-range 100NTU Turbidity Sensor For Drinking Water
>>Overview
The turbidity sensor is based on the infrared scattering light technology, that is, the infrared light emitted by the light source will scatter through the measured sample during the transmission process, and the intensity of the scattered light is directly proportional to the turbidity. The turbidity sensor sets the scattered light receiver in the 90° direction, and obtains the turbidity value by analyzing the intensity of this set of scattered light. It can be widely used in turbidity monitoring in sewage water plant, water plant, water station, surface water, industry and other fields.
>>Technical Parameter
| Power/Outlet | 9~36VDC/RS485 MODBUS RTU |
| Measurement mode | 90°IR scattered light method |
| Dimensions | 110*80*80mm |
| Waterproof rating | IP65 |
| Measurement range | 0.001-100.00NTU |
| Measurement accuracy | 0 – 40 NTU, ±2%；40 – 100 NTU,±5% |
| Pressure resistance | ≤0.2Mpa |
| Flow velocity | 300ml/min≤X≤500ml/min |
| Measuring temperature | 0-45℃ |
| Calibration | Standard liquid calibration, water sample calibration |
| Cable length | Standard 1m,can be extended |
| Thread | Flow-through |
>>Dimension And Installation
Install the sensor in place to ensure representative measurements. Install the sensor in an easily accessible position to facilitate regular cleaning and maintenance of the sensor. Install the sensor near a representative, good sampling site:
