Digital Oil and Grease Water Quality Sensor
>>Overview
The oil-in-water sensor operates based on the characteristic that dissolved oils exhibit specific absorption and emission peaks in the spectrum. It emits monochromatic light at the spectral absorption peak of dissolved oils into water. The dissolved oils absorb energy from this monochromatic light and subsequently emit light at a different wavelength corresponding to their emission peak. The intensity of this emitted light is directly proportional to the concentration of dissolved oils in the water.
Digital Oil-in-Water Sensor Probe features direct immersion measurement without requiring sampling or pretreatment; operates without chemical reagents, eliminating secondary pollution; offers short response time for continuous monitoring; incorporates an automatic cleaning function to minimize maintenance. Suitable for environmental protection and general water treatment applications.
>>Feature
- Utilizes spectral method to accelerate response time and ensure stable signal.
- Electrode housing is constructed with stainless steel, capable of withstanding temperatures from 0 to 45°C.
- Equipped with a dedicated high-quality quad-core shielded cable for oil-in-water sensors, enhancing signal accuracy and stability.
>>Technical Parameter
Power Supply: 12VDC
Output: RS485 MODBUS RTU
Housing Material: 316L Stainless Steel
Protection Rating: IP68
Measuring Range: 0-50 mg/L
Temperature Range: 0-50°C
Calibration: Standard Solution Calibration, Water Sample Calibration
Cable Length: Standard 10m (Extendable to 100m)
Applications: Environmental Protection, General Water Treatment
