Nanjing Juge Environmental Technology Co., Ltd.
Add to Cart
Total Iron Fe Online Water Quality Analyzer
>>Overview
>>Principle
The product employs the spectrophotometric method for iron detection. Under specific acidic conditions, ferrous ions (Fe²⁺) in the sample react with an indicator to form a red-colored complex. The monitor detects this color intensity change, converts it into iron concentration values, and outputs the results. The amount of colored complex generated corresponds to the total iron concentration.
>>Technical Parameter
| Test Method |
Phenanthroline Spectrophotometric Method |
| Measuring Range |
0~5mg/L (segmented measurement, expandable) |
| Detection Limit |
≤0.02mg/L |
| Resolution |
0.001mg/L |
| Accuracy |
±5% |
| Repeatability |
≤±5% |
|
Drift (24h) |
Zero drift: ±5% Span drift: ±10% |
| Measurement Time |
<30min (digestion time adjustable) |
| Measurement Modes |
Adjustable time interval, fixed time point, or triggered measurement |
|
Calibration Modes |
Automatic calibration (1~99 days adjustable) Manual calibration based on actual water samples |
|
Maintenance Cycle |
|
| Human-Machine Interface |
Touchscreen display and command input |
|
Self-Diagnosis & Protection |
Self-diagnoses operational status; retains data during anomalies/power outages Automatically clears residual reactants and resumes operation after reset/power recovery |
| Data Storage |
5-year data capacity |
| Input Interface |
Digital input |
|
Output Interfaces |
1× RS232, 1× RS485 2× 4~20mA analog outputs |
|
Operating Environment |
Indoor use; recommended temperature: 5~28℃, humidity ≤90% (non-condensing) |
|
Power Supply |
Voltage: AC 220±10% V Frequency: 50±0.5 Hz Power: ≤150W (excluding sampling pump) |
|
Dimensions |
520H × 370W × 265D (mm) |